Custom castings from your drawings or samples. Send your requirements for a quotation.Request a Quote
Jiangkai Casting logoJK CastingDrawing-based OEM metal parts

Material reference

GP240GH (1.0619) Cast Steel to EN 10213: Composition, Properties and Equivalents

GP240GH, material number 1.0619, is a carbon steel casting grade in EN 10213, the European standard for steel castings for pressure purposes. Its former German designation was GS-C25. This page gives its composition and properties and how it compares with ASTM A216 WCB.

JK Casting · Buyer resource · Updated 16 November 2026

What GP240GH is

GP240GH is a carbon steel casting grade for pressure purposes in EN 10213. In the name, G marks a casting, P marks steel for pressure purposes, 240 is the minimum yield strength in MPa, and H refers to elevated-temperature properties. Its material number is 1.0619; the former German standard DIN 17245 called it GS-C 25.

GP240GH equivalents and nearest grades

Scroll sideways to see the whole table

Approximate comparison. The standard on the drawing governs; substitution needs buyer approval.
GradeStandardMin. yield, MPaTensile, MPaMin. elongation, %How it compares
GP240GHEN 10213 (Europe)240420–60022Reference grade
WCBASTM A216 (USA)250485–65522Similar minimum yield, higher tensile range
ZG230-450GB/T 11352 (China)230450 min.22Similar minimum yield and elongation

These equivalents are approximate, not identical materials. Composition limits, test methods and heat treatment differ between standards. The standard named on the drawing governs, and any substitution needs the buyer’s written approval.

GP240GH chemical composition

Scroll sideways to see the whole table

EN 10213, Table 2: cast analysis.
ElementContent, % by mass
Carbon (C)0.18–0.23
Silicon (Si)≤0.60
Manganese (Mn)0.50–1.20
Phosphorus (P)≤0.030
Sulfur (S)≤0.020
Chromium (Cr)≤0.30
Molybdenum (Mo)≤0.12
Nickel (Ni)≤0.40
Copper (Cu)≤0.30
Vanadium (V)≤0.03

Chromium, molybdenum, nickel, vanadium and copper together are limited to 1.00%. For castings with a ruling thickness below 28 mm, EN 10213 allows sulfur up to 0.030%.

GP240GH mechanical properties

Scroll sideways to see the whole table

EN 10213, Table 3: minimum values for thicknesses up to 100 mm.
PropertyRequirement
Minimum 0.2% proof strength (Rp0.2), MPa240
Tensile strength (Rm), MPa420–600
Minimum elongation, %22
Minimum impact energy (KV) at room temperature, normalised, J27

The tensile values apply to both the normalised (+N) and the quenched and tempered (+QT) condition.

Heat treatment and welding

Heat treatment. EN 10213 lists GP240GH as normalised (+N, 900–980 °C) or quenched and tempered (+QT, 890–980 °C with tempering at 600–700 °C).

Welding. With carbon at 0.18–0.23%, GP240GH is a weldable carbon steel; follow a welding procedure agreed for the part.

How JK Casting makes GP240GH castings

JK Casting makes carbon steel castings to customer drawings in Gaomi, Shandong, China. Parts are sand cast, including shell moulding in resin-coated sand, or made by lost-wax investment casting; investment castings made in-house weigh up to about 20 kg each. Castings are supplied raw or machined, and JK machines only the castings it makes. Each drawing is quoted separately, with tooling and unit price on separate lines.

For a quotation, send the drawing with the full grade designation and standard, the heat treatment condition and any tests the part needs. Material records such as EN 10204 3.1 certificates are provided when agreed for the order.

Related pages: Steel castings · Investment casting · Sand casting · What to put on a casting drawing · Send a drawing for quotation

Frequently asked questions

What is GP240GH?

A carbon steel casting grade for pressure purposes in EN 10213, material number 1.0619. G marks a casting, P pressure purposes, 240 the minimum yield strength in MPa and H elevated-temperature properties.

Is GP240GH the same as GS-C25?

GS-C 25 is the designation used in the former German standard DIN 17245; the grade now appears in EN 10213 as GP240GH (1.0619). Use the EN designation on current drawings.

Is GP240GH equivalent to ASTM A216 WCB?

They are often compared, but not identical. Both require about 240–250 MPa minimum yield; GP240GH’s tensile range is 420–600 MPa against WCB’s 485–655 MPa. A substitution needs approval.

Standards referenced: EN 10213; ASTM A216/A216M-21; GB/T 11352-2009.