What ZG230-450 is
In GB/T 11352 names, ZG stands for cast steel (铸钢); the first number is the minimum yield strength and the second the minimum tensile strength, both in MPa.
ZG230-450 is a general engineering cast carbon steel with up to 0.30% carbon. It combines moderate strength with good toughness and weldability and is used for moderately loaded machine parts such as housings, bearing covers and base plates.
ZG230-450 equivalents: ASTM and ГОСТ
Scroll sideways to see the whole table
| Grade | Standard | Min. yield, MPa | Tensile, MPa | Min. elongation, % | How it compares |
|---|---|---|---|---|---|
| ZG230-450 | GB/T 11352 (China) | 230 | 450 min. | 22 | Reference grade |
| 25Л | ГОСТ 977 (Russia), normalised | 235 | 441 min. | 19 | Similar values: higher minimum yield, lower minimum tensile strength |
| WCB | ASTM A216 (USA) | 250 | 485–655 | 22 | Higher minimum yield and tensile strength |
| ZG270-500 | GB/T 11352 (China) | 270 | 500 min. | 18 | The next GB grade up by strength |
These equivalents are approximate, not identical materials. Composition limits, test methods and heat treatment differ between standards. The standard named on the drawing governs, and any substitution needs the buyer’s written approval.
ZG230-450 chemical composition
Scroll sideways to see the whole table
| Element | Content, % by mass |
|---|---|
| Carbon (C) | ≤0.30 |
| Silicon (Si) | ≤0.60 |
| Manganese (Mn) | ≤0.90 |
| Phosphorus (P) | ≤0.035 |
| Sulfur (S) | ≤0.035 |
| Nickel (Ni) | ≤0.40 |
| Chromium (Cr) | ≤0.35 |
| Copper (Cu) | ≤0.40 |
| Molybdenum (Mo) | ≤0.20 |
| Vanadium (V) | ≤0.05 |
Values from GB/T 11352-2009, Table 1, all maximums; nickel, chromium, copper, molybdenum and vanadium are residual elements. The 1989 edition set different silicon, phosphorus and sulfur limits, so check which edition the drawing cites.
ZG230-450 mechanical properties
Scroll sideways to see the whole table
| Property | Requirement |
|---|---|
| Minimum tensile strength, MPa | 450 |
| Minimum yield strength, MPa | 230 |
| Minimum elongation, % | 22 |
| Minimum reduction of area, % | 32 |
Values from GB/T 11352-2009. Impact values are agreed per contract and are left out here.
Heat treatment and welding
Heat treatment. GB/T 11352 carbon steel castings are normally supplied normalised, or normalised and tempered; annealing is also used. State the required condition on the drawing.
Welding. With carbon limited to 0.30%, ZG230-450 welds well. Preheat and post-weld heat treatment depend on section thickness and the welding procedure.
How JK Casting makes ZG230-450 castings
JK Casting makes carbon steel castings to customer drawings in Gaomi, Shandong, China. Parts are sand cast, including shell moulding in resin-coated sand, or made by lost-wax investment casting; investment castings made in-house weigh up to about 20 kg each. Castings are supplied raw or machined, and JK machines only the castings it makes. Each drawing is quoted separately, with tooling and unit price on separate lines.
For a quotation, send the drawing with the full grade designation and standard, the heat treatment condition and any tests the part needs. Material records such as EN 10204 3.1 certificates are provided when agreed for the order.
Related pages: Steel castings · Investment casting · Sand casting · What to put on a casting drawing · Send a drawing for quotation
Frequently asked questions
What does ZG230-450 mean?
ZG stands for cast steel (铸钢). 230 is the minimum yield strength and 450 the minimum tensile strength, both in MPa, as set in GB/T 11352.
What is the ASTM equivalent of ZG230-450?
There is no identical ASTM grade. ASTM A216 WCB is often compared with it, but WCB requires more: 250 MPa yield and 485–655 MPa tensile strength. A substitution needs approval.
What is the Russian equivalent of ZG230-450?
ГОСТ 977 25Л has similar values: normalised, 235 MPa yield, 441 MPa tensile and 19% elongation, against 230 MPa, 450 MPa and 22% for ZG230-450. The equivalence is approximate.
Is ZG230-450 the same as ZG25?
ZG25 is the former designation of the grade, used before the strength-based names of GB/T 11352. Current drawings name ZG230-450 together with its standard.
Standards referenced: GB/T 11352-2009; ASTM A216/A216M-21; ГОСТ 977-88.
