What ZG310-570 is
In GB/T 11352 names, ZG stands for cast steel (铸钢); the first number is the minimum yield strength and the second the minimum tensile strength, both in MPa.
ZG310-570 is a high-strength general engineering cast carbon steel with up to 0.50% carbon. It has good strength and machinability but lower ductility and toughness than the lower grades, and is used for heavily loaded parts such as large gears, rollers and frames.
ZG310-570 equivalents and nearest grades
Scroll sideways to see the whole table
| Grade | Standard | Min. yield, MPa | Tensile, MPa | Min. elongation, % | How it compares |
|---|---|---|---|---|---|
| ZG310-570 | GB/T 11352 (China) | 310 | 570 min. | 15 | Reference grade |
| 45Л | ГОСТ 977 (Russia), normalised | 314 | 540 min. | 12 | Similar minimum yield, lower minimum tensile strength and elongation |
| ZG270-500 | GB/T 11352 (China) | 270 | 500 min. | 18 | The next GB grade down by strength |
These equivalents are approximate, not identical materials. Composition limits, test methods and heat treatment differ between standards. The standard named on the drawing governs, and any substitution needs the buyer’s written approval.
ZG310-570 chemical composition
Scroll sideways to see the whole table
| Element | Content, % by mass |
|---|---|
| Carbon (C) | ≤0.50 |
| Silicon (Si) | ≤0.60 |
| Manganese (Mn) | ≤0.90 |
| Phosphorus (P) | ≤0.035 |
| Sulfur (S) | ≤0.035 |
| Nickel (Ni) | ≤0.40 |
| Chromium (Cr) | ≤0.35 |
| Copper (Cu) | ≤0.40 |
| Molybdenum (Mo) | ≤0.20 |
| Vanadium (V) | ≤0.05 |
Values from GB/T 11352-2009, Table 1, all maximums; nickel, chromium, copper, molybdenum and vanadium are residual elements. The 1989 edition set different silicon, phosphorus and sulfur limits, so check which edition the drawing cites.
ZG310-570 mechanical properties
Scroll sideways to see the whole table
| Property | Requirement |
|---|---|
| Minimum tensile strength, MPa | 570 |
| Minimum yield strength, MPa | 310 |
| Minimum elongation, % | 15 |
| Minimum reduction of area, % | 21 |
Values from GB/T 11352-2009. Impact values are agreed per contract and are left out here.
Heat treatment and welding
Heat treatment. GB/T 11352 carbon steel castings are normally supplied normalised, or normalised and tempered; annealing is also used. State the required condition on the drawing.
Welding. With up to 0.50% carbon, ZG310-570 has limited weldability; welding and weld repair need preheat and a qualified procedure agreed for the part.
How JK Casting makes ZG310-570 castings
JK Casting makes carbon steel castings to customer drawings in Gaomi, Shandong, China. Parts are sand cast, including shell moulding in resin-coated sand, or made by lost-wax investment casting; investment castings made in-house weigh up to about 20 kg each. Castings are supplied raw or machined, and JK machines only the castings it makes. Each drawing is quoted separately, with tooling and unit price on separate lines.
For a quotation, send the drawing with the full grade designation and standard, the heat treatment condition and any tests the part needs. Material records such as EN 10204 3.1 certificates are provided when agreed for the order.
Related pages: Steel castings · Investment casting · Sand casting · What to put on a casting drawing · Send a drawing for quotation
Frequently asked questions
What does ZG310-570 mean?
ZG stands for cast steel (铸钢). 310 is the minimum yield strength and 570 the minimum tensile strength, both in MPa, as set in GB/T 11352.
Is ZG310-570 the same as ZG45?
ZG45 is the former designation of the grade. Current drawings name ZG310-570 together with its standard.
What is the Russian equivalent of ZG310-570?
ГОСТ 977 45Л is the nearest by strength: normalised, 314 MPa yield, 540 MPa tensile and 12% elongation, against 310 MPa, 570 MPa and 15% for ZG310-570. The equivalence is approximate.
How does ZG310-570 differ from ZG270-500?
ZG310-570 allows more carbon (0.50% against 0.40%) and requires more strength (310 MPa yield, 570 MPa tensile against 270 and 500 MPa), with lower minimum elongation (15% against 18%).
Standards referenced: GB/T 11352-2009; ГОСТ 977-88.
