Custom castings from your drawings or samples. Send your requirements for a quotation.Request a Quote
Jiangkai Casting logoJK CastingDrawing-based OEM metal parts

Material reference

ZG200-400 Cast Steel (GB/T 11352): Equivalents, Composition and Properties

ZG200-400 is the lowest-strength, lowest-carbon grade in China’s GB/T 11352: minimum yield strength 200 MPa, minimum tensile strength 400 MPa. Its former designation was ZG15. This page gives its composition and properties, how it compares with 20Л and ZG230-450, and what to put on an RFQ.

JK Casting · Buyer resource · Updated 16 November 2026

What ZG200-400 is

In GB/T 11352 names, ZG stands for cast steel (铸钢); the first number is the minimum yield strength and the second the minimum tensile strength, both in MPa.

ZG200-400 is a low-carbon general engineering cast steel with up to 0.20% carbon. It has good ductility, toughness and weldability and is used for lightly loaded machine parts that need high toughness, such as machine bases and gearbox housings.

ZG200-400 equivalents and nearest grades

Scroll sideways to see the whole table

Approximate comparison. The standard on the drawing governs; substitution needs buyer approval.
GradeStandardMin. yield, MPaTensile, MPaMin. elongation, %How it compares
ZG200-400GB/T 11352 (China)200400 min.25Reference grade
20ЛГОСТ 977 (Russia), normalised216412 min.22Higher minimum yield and tensile strength, lower minimum elongation
ZG230-450GB/T 11352 (China)230450 min.22The next GB grade up by strength

These equivalents are approximate, not identical materials. Composition limits, test methods and heat treatment differ between standards. The standard named on the drawing governs, and any substitution needs the buyer’s written approval.

ZG200-400 chemical composition

Scroll sideways to see the whole table

GB/T 11352-2009, Table 1: maximum values.
ElementContent, % by mass
Carbon (C)≤0.20
Silicon (Si)≤0.60
Manganese (Mn)≤0.80
Phosphorus (P)≤0.035
Sulfur (S)≤0.035
Nickel (Ni)≤0.40
Chromium (Cr)≤0.35
Copper (Cu)≤0.40
Molybdenum (Mo)≤0.20
Vanadium (V)≤0.05

Values from GB/T 11352-2009, Table 1, all maximums; nickel, chromium, copper, molybdenum and vanadium are residual elements. The 1989 edition set different silicon, phosphorus and sulfur limits, so check which edition the drawing cites.

ZG200-400 mechanical properties

Scroll sideways to see the whole table

GB/T 11352-2009: minimum values.
PropertyRequirement
Minimum tensile strength, MPa400
Minimum yield strength, MPa200
Minimum elongation, %25
Minimum reduction of area, %40

Values from GB/T 11352-2009. Impact values are agreed per contract and are left out here.

Heat treatment and welding

Heat treatment. GB/T 11352 carbon steel castings are normally supplied normalised, or normalised and tempered; annealing is also used. State the required condition on the drawing.

Welding. With carbon limited to 0.20%, ZG200-400 is the easiest GB/T 11352 grade to weld. Preheat and post-weld heat treatment depend on section thickness and the welding procedure.

How JK Casting makes ZG200-400 castings

JK Casting makes carbon steel castings to customer drawings in Gaomi, Shandong, China. Parts are sand cast, including shell moulding in resin-coated sand, or made by lost-wax investment casting; investment castings made in-house weigh up to about 20 kg each. Castings are supplied raw or machined, and JK machines only the castings it makes. Each drawing is quoted separately, with tooling and unit price on separate lines.

For a quotation, send the drawing with the full grade designation and standard, the heat treatment condition and any tests the part needs. Material records such as EN 10204 3.1 certificates are provided when agreed for the order.

Related pages: Steel castings · Investment casting · Sand casting · What to put on a casting drawing · Send a drawing for quotation

Frequently asked questions

What does ZG200-400 mean?

ZG stands for cast steel (铸钢). 200 is the minimum yield strength and 400 the minimum tensile strength, both in MPa, as set in GB/T 11352.

Is ZG200-400 the same as ZG15?

ZG15 is the former designation of the grade. Current drawings name ZG200-400 together with its standard.

What is the Russian equivalent of ZG200-400?

ГОСТ 977 20Л is often compared with it: normalised, 216 MPa yield, 412 MPa tensile and 22% elongation, against 200 MPa, 400 MPa and 25% for ZG200-400. The comparison is approximate.

Standards referenced: GB/T 11352-2009; ГОСТ 977-88.